Reference: U-08055
Brand: Sang-A Pneumatic
8x5.5mm Package 25, 50 & 100Mts
Reference: 413160008600
Brand: Sang-A Pneumatic
8 x 6mm, Package 25, 50 & 100Mts
Reference: 413100008600
Brand: Sang-A Pneumatic
8x6mm
Reference: 413160012900
Brand: Sang-A Pneumatic
12 x 9mm Package 25, 50 & 100Mts
Reference: 405290240000
Brand: Finder
Finder relays PCB, 2CO, 24 Vdc, 8A
Banner
7 PSI
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Gas alarm device is a gadget detecting the explosive gasses in environment.Ingredients of the detected gases can be one of these gasses; methane (CH4),propane(C3H8) and butane (C4H10) or mixture of these gasses. Natural gas is methane gas. LPG is made of butane gas,propane gas or mixture of these two gasses. When the gas alarm device is supplied with 230V AC 50/60Hz voltage,green LED lights.
After 1.5 minutes calibrating time (sensor's heating time), device gets active.Before calibrating time is up, don't use any testing gas. After calibrating time , if there is any gas leakage over the limits, the sensor detects the gas in 10 seconds at the latest and gives visual and audible alarm. As long as the gas leakage is upper levels, device goes on to giving alarm. When the leakage level is lower than alarm level, device change to normal condition instinctively , gets ready to detect. If there is no electricity, device does not work. If closing the gas valve or aspirating the gas is wanted when the alarm condition, the output relay of the gas alarm device can be used for it. From the output 230V AC voltage and current lower form 7A can be supplied.
Application : Natural Gas (metan), LPG
Devices Type : A Type (Indication and audible alarm , ouput signal)
Sensor : Green is system active, Red - emergency problem ,Yellow -Failure
Sensor Type : Semi Conducting (5V± 0,1)
Body Material : ABS
Calibration Time : 1,5 Min
Reaction Time : <10 Sec
Audible Alarm : Piezoelectric
Voice : 85 dB
Voltage : 230VAC + -% 10, 50/60Hz
Output Signal : 230V AC 7A NA
Power Consumption : 3W
Working Area : House use
Working Pressure : -10 ° C ... +50 ° C
Humidity : 0-95%
Body Dimensions : 60 mm x 100 mm x 45 mm
Referans Standarts: EN 50194-1, EN 60335-1, EN 60079-29-1, EN 50244
Reference: SPS210L201
Brand: Tpc Pneumatic
Rc1/4, On-Off 14.22-42.66PSI, 2 Lamp 220Vac
Reference: SPS230
Brand: Tpc Pneumatic
Rc3/8, On-Off 42.66~142.2 PSI
Reference: SMS1000S3
Brand: Tpc Pneumatic
For PC3, 24Vdc Wire 1Mt
Reference: 25040
Brand: Dwyer Instruments
0-40.0in of Water, 2-5000
Reference: SMS1000S5
Brand: Tpc Pneumatic
For PC5, 24Vdc, Wire 1mt
Reference: DV41205D02
Brand: Tpc Pneumatic
Reference: WM2-A-C-04
Brand: Dwyer Instruments
Flowmeter, range 60-600 SCFH air
Reference: SMS1000R15L
Brand: Tpc Pneumatic
Rc 1/8, 24Vdc Wire 1mt
Reference: WM1496AV53DS
Brand: Carlo Gavazzi
Power Analyzer Input 3x380(660V) - 5(6)A, 230Vac Supply, Port RS 485
Reference: SPS210
Brand: Tpc Pneumatic
Rc1/4, On-Off 14.22-42.66PSI
7 PSI
